PVC pipe mould

  • Characteristics
  • Technical Data
  • Production Process

Mold is made of high quality alloy steel, the quenched and tempered treatment, flow surface polishing chromium plating processing.Sizing material for copper alloy;Range of pipe:: 20,32,40,50,63,75,90,110,125,150,200,225,250,315,400.etc. Have Basic mould,mouth mould, core mould, have mould turn over car.
Applied for manufacture of caliber PVC,UPVC supply and drain pipes.
Competitive Advantage:
1. GF series plastic pipe production line is mainly used in manufacture of the plastic PVC pipes with tube diameters and wall thickness, which are used for water supply and drainage in the field of agriculture and construction.
2. This line is composed of conical twin-screw extruder, vacuum calibration table, haul-off, cutter, stacker etc.
3. The extruder and the haul-off adopt the quality AC frequency conversion control device.
4. The vacuum pump and motor adopt the famous brand.
5. The haul-off have two-claw, three-claw, four-claw, six-claw.
6. It may choose the saw blade cutting type or the planet cutting production efficiency.
7. Our company may equipped the special device for the manufacture of the inner wall spiral coil and core layer blister according to the client’s requirement

Max. pipe diameter(mm)125160250500630
Total power of auxiliary machine (kw)13141927.535
Cooling water consumption (m3/h)366912
Compressed air pressure (Mpa)

Fill out my online form.

Contact Us

Tel: +86-512-58538001/58538002
Mob: +86-13921994486
E-mail: admin@polestarmachinery.com
Address:Zone O, NO.3, Zhenxing Middle Street, Economic Development Zone, Zhangjiagang City, Jiangsu Province.

© 2021 Zhangjiagang Polestar Machinery Co.,Ltd. All Rights Reserved